Home > Injection Molding Solution >

ISO Shrinkage Injection Moulding Solutions OEM

Product Categories

Injection Molded Parts [44]
Plastic Molded Parts [35]
Precision Injection Molding [54]
Precision Hardware Parts [28]
Die Casting Parts [40]
Die Casting Mold [11]
Silicone Rubber Parts [15]
Silicone Injection Mold [1]
Telecommunication Parts [16]
Plastic Injection Molding Medical Parts [14]
Household Appliance Parts [17]
Electronic Spare Parts [34]
Molding Car Parts [14]
Injection Molding Solution [17]

Sun On Plastic Moulding Limited

Contact Now

ISO Shrinkage Injection Moulding Solutions OEM

Ask Lasest Price
Price :	Negotiable
Payment Terms :	T/T
Supply Ability :	More than 1 million
Delivery Time :	30day
Brand Name :	OEM
Certification :	ISO

Add to Cart

Product Details
Company Profile

ISO Shrinkage Injection Moulding Solutions OEM

The Cause And Countermeasure Analysis Of Shrinkage In Products

Reprint Books In A Reduced Format

Shrinkage refers to the depression of the product table and the production of insects, like hair in the thicker part of the wall. In the process of cooling the molten resin from the external part, when the volume shrinkage cannot be compensated, the resin on the surface of the formed product is subjected to the volume shrinkage of the molten resin in 6 parts, resulting in the formation of q marks.

	Cause	Cuntermeasure
Forming condition	1. There are many cases of insufficient pressure and retaining pressure during the injection period 2. The pressure retention time is insufficient 4. The mold temperature is not appropriate, the mold temperature is too low, the gate curing fast, pressure retention failure is easy to produce shrinkage hole: the mold temperature is too high, setting the appropriate mold temperature is easy to produce shrinkage marks 5. The injection speed is too fast The temperature of the material is too high, and the shrinkage of the material is too large	1. Increase the injection pressure and pressure holding pressure; 2. Increase the pressure raising time 3. Increase the measurement distance 4. In thick products, this tendency is stronger and the speed is reduced 5. Properly reduce the temperature of the material
Die	1. The runner and gate are too small. 2. Improper placement of pouring II makes the material flow distance too long 3. Insufficient or inconsistent mold cooling	1. Increase the section of runner and gate 2. Review runner and gate 3. Check the cooling system
Product Design	1. Uneven thickness 2. The shape of tendons is not standard	1. Avoid uneven thickness, can use stolen thick pin or groove. 2. Avoid thick and long tendons
Material	1. The shrinkage rate of materials is too large 2. Poor material fluidity	1. Switch to materials with low shrinkage 2. Improve material mobility
Other	Screw check ring is damaged	Replace the check ring

Product Tags:

Shrinkage injection moulding solutions

injection moulding solutions OEM

ISO injection moulding solutions

ISO Shrinkage Injection Moulding Solutions OEM

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sun On Plastic Moulding Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!